Preparing for Printing

1.Quit all applications currently running.

2.Insert the CD-ROM into the CD-ROM drive. The installer starts.

Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.

3.Select an interface language, and then click [OK]. The default interface language is English.

4.Click [Printer Driver].

5.The software license agreement appears in the [<License Agreement>] dialog box. After reading the agreement, click [I accept the agreement.], and then click [Next].

6.Click [Connected via LAN].

7.Double-click the printer name to display the printer settings.

The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.

8.Click [Port:], and then click [Add].

9.Click [SmartDeviceMonitor], and then click [OK].

10.Click [IPP].

11.In the [Printer URL] box, enter "http://printer's address/ipp" as the printer's address.

When setting SSL, a protocol for encrypted communication, under environment which server authentifica- tion is issued, enter "https://(printer's address)/ipp".

Internet Explorer must be installed on your computer. Use the highest version. Internet Explorer 6.0 or higher is recommended.

12.Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

13.Click [Detailed Settings] to make necessary settings.

For information about the settings, see SmartDeviceMonitor for Client Help.

14.Check that the port of the selected printer is displayed in [Port:].

15.Select the [Default Printer] check box to configure the printer as default.

16.Click [Continue]. Installation starts.

17.Select whether or not to open the Status monitor automatically.

18.Click [Next >].

19.Click [Finish] in the installation completion dialog box.

z

z

A message about restarting the computer may appear. Restart the computer to complete installation.

If the message "Digital Signature Not Found" or the [Found New Hardware Wizard] or [Hardware Installation] dialog box appears, see "Notes on the Installation",Quick Installation Guide.

138