Preparing for Printing

z

z

z

z

A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.148 "If a Message Appears during Installation".

p.240 "SSL (Secure Sockets Layer) Encryption"

p.240 "User Settings for SSL (Secure Sockets Layer)"

p.241 "Installing the Certificate Using SmartDeviceMonitor for Client"

Changing the Port Settings for SmartDeviceMonitor for Client

Follow the procedure below to change the SmartDeviceMonitor for Client settings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.

zIf you via a print server connected to the printer are using the SmartDeviceMonitor port, Recovery Printing and Parallel Printing cannot be used from the client.

Windows 98:

1.Open [Printers] window from [Start] menu.

2.In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].

3.Click the [Details] tab, and then click [Configure Port]. The [Port Configurarion] dialog box appears.

Windows 2000 / Windows NT 4.0:

1.Open [Printers] window from [Start] menu.

2.In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].

3.On the [Ports] tab, click [Configure Port]. The [Port Settings] dialog box appears.

Windows XP, Windows Server 2003:

1.On the [Start] menu, point to [Settings], and then click [Printers].

2.In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].

3.Click the [Details] tab, and then click [Configure Port].

The [Port Settings] dialog box appears.

zFor TCP/IP, timeout setting can be configured.

zIf no settings on the [Recovery/Parallel Printing] tab are available, follow the procedure below.

139