SETTING UP
1-11
SETTING UP
TESTING
After you load paper, you can test the machine using the Test menu available
from the Control Panel.
Follow these steps to access the Test menu:
1Make sure the [ ] and [ ] indicator lights are lit.
2Press the [ ] key so the [ ] indicator turns off. This indicates you are in
the Menu mode.
3
Press the
[5]
key until “Test/Print” appears on the display , then press the
[
]
key
4Press the [5] key until “System Config” appears on the display , then press
the [ ] key to print the Configuration Page, listing information about
the machine system and configuration.
5After printing the page, the printer will return to the On Line mode and display
“Ready”.
6Check the Configuration Page for your settings.
Refer to the “Using the Control Panel” chapter in this manual for further
information on configuring the machine and testing the printing capabilities.