USING THE OPTIONS
4-13
USING THE OPTIONS
8Lower the pressure bar so that it
rests on top of the stack of
envelopes.
9Open the Front Cover.
jPull the lever down to the left so
you can see the * mark under it
as shown. Then,close the Front
Cover.
Important: Be sure to return the
lever to its original position after
finishing the envelope printing job.
kOpen the External Tray, or specify
the output destination as Shift Tray
Face-up.
Note:The Shift Tray is available
only when the optional Finisher is
installed.
lTo output to the Shift Tray, you must select Shift Tray Face-up as the output
destination,using your application, your printer driver, or Control Panel.