
USING THE CONTROL PANEL
2-11
USING THE
CONTROL PANEL
Tray Size (*) SelectionYou use this selection to specify special standard paper sizes for standard input
trays, Tra y 1 and Tray 2, and for the optional tra ys , Tray 3 and Tray 4, located in
the Paper Bank.
Each of the paper trays has a paper size selection dial to specify the paper size
in the tray. You can specify the sizes not indicated on the selection dial by
setting the dial to the “*” position and entering the paper size using this selection.
This allows the printer to conveniently accommodate a wide range of paper
sizes.
To access the selection for each tray , press the [ ] key and press the [5]
key or the [6] key until the tray for which you want to specify a special paper
size displays. Then press the [ ] key to display the options. The options
are as follows:
❐Letter 11" x 81/2" K
❐Letter 81/2" x 11" L
❐Legal 81/2" x 14" L
❐11" x 17" L
❐Exec. 71/4" x 101/2" L
❐Exec. 101/2" x 71/4" K
❐8" x 13" L
❐A3 L
❐A4 L
❐A4 K
❐A5 K
❐B4 JIS L
❐B5 JIS L
❐B5 JIS K
❐81/4" x 13" L
❐A3 L
The default value is A4 K.
Note: If the paper size selection dial is set to “
*