USING THE OPTIONS
4-12
4Raise the spring-loaded pressure
bar and lock it into position at the
top of the Envelope Feeder.
5Move the envelope guides toward the edges of the Envelope Feeder.
6Prepare a stack of up to 100 envelopes by fanning them and evening up the
edges to make sure that none of the envelope flaps will open. Place the
stack into the Envelope Feeder, face up with the top of the envelopes facing
the rear of the printer.
Note: Make sure the end of the stack going into the feeder is angled, so
that the bottom of the stack extends forward (into the feeder) further
than the top of the stack. The end of the stack should not be perfectly
flat.
7Position the guides against the
stack of envelopes.