Ricoh Network Guide [POP3], [Effective], Check [Effective] is selected for TCP/IP, If you select [On] for [POP before SMTP], select this function as well

		Setting Up the Machine on a Network
Interface		Settings
IEEE 802.11b	Interface Settings/	IP Address	$
(wireless LAN)	Network
		Gateway Address	$
	See p.37 “Network”.
		DNS Configuration	❍
		DDNS Configuration	❍
		Domain Name	❍
				2
		WINS Configuration	❍
		LAN Type *2	$
		Ethernet Speed	❍
		Effective Protocol *3	$
		Permit SNMP V3 Communication	❍
		Permit SSL / TLS Communication	❍
		Host Name	❍
	Interface Settings/	Communication Mode	$
	IEEE 802.11b *2
		SSID Setting	❍
	See p.41 “IEEE
		Channel	❍
	802.11b”.
		WEP (Encryption) Setting	❍
		Transmission Speed	❍
	File Transfer	SMTP Server	$
	See p.42 “File Trans-
		SMTP Authentication	❍
	fer”.
		POP before SMTP	❍
		POP3 Setting *4	❍
		Administrator's Address	❍
		E-mail Communication Port *5	❍
		Program / Change / Delete E-	❍
		mail Message
		Program / Change / Delete	❍
		Subject
		Scanner Recall Interval Time	❍
		Number of Scanner Recalls	❍

*1

*2

*3

*4

*5

Appears when the optional IEEE 1394 interface board is installed. Appears when the optional IEEE 802.11b interface unit is installed.

If Ethernet and 802.11b (wireless LAN) are both connected to the machine, the selected interface has priority.

Check [Effective] is selected for TCP/IP.

If you select [On] for [POP before SMTP], select this function as well.If you select [On] for [POP before SMTP], check the port number for [POP3].

23