Ricoh Network Guide LDAP Server Settings, key, Note, [On], Note, [On], [Off], Press, Press the, [LDAP Server], [High Security], [*Not Programmed], [Administrator Tools]

Connecting and Setting Up

LDAP Server Settings

Program the LDAP server to find up e-mail destinations in the LDAP server Address Book directly. This function is possible when sending scan files by e-mail using the scanner or

2 fax function, or when entering authentication information.

Before using this function

To start an LDAP search, make sure that the items listed below are set. For other items, check your environment and make any necessary changes.

•Server Name

•Search Base

•Port No.

•Search Conditions

•Authentication method selection

Note

❒For authentication method, se- lect from [High Security], [On], or [Off].

•User Name/Password

The settings above differ depend- ing on server environment. Check your environment and make any necessary changes.

Note

❒To use the LDAP server in Admin- istrator Tools, select [On] under

[LDAP Server].

❒This function supports LDAP Ver- sion 2.0 and 3.0. Ver 2.0 does not support High Security authentica- tion.

Program/Change/Delete LDAP Server

To enter Program/Change/Delete LDAP Server

A Press the {User Tools/Counter/Inquiry}

key.

B Press [System Settings].

C Press [Administrator Tools], and then press [TNext] twice.D Press [Program / Change / Delete LDAP Server].To program/change the LDAP serverA Select the LDAP server you want to program or change.

When programming the server, select [*Not Programmed].

B Set each item as necessary.

50