Ricoh Network Guide Note, [On], Note, Note, Note, Note, [Off], (SBP-2)], ❖IP over, [Active], [Scope ID], Limitation, [Scope ID], Limitation, Limitation, Domain Name, [SCSI print

Connecting and Setting Up

2

❖Domain Name

Make settings for the domain name.

•Auto-Obtain (DHCP)

•Specify

• Domain Name

Note

❒Default: Auto-Obtain (DHCP)

❖WINS Configuration

You can specify the WINS server settings.

• On

If [On] is selected, specify the [VWINS Server] IP address as “xxx.xxx.xxx.xxx” (“xxx” indi- cates a number).

If DHCP is in use, specify the

[Scope ID].

•Primary WINS Server

•Secondary WINS Server

•Scope ID

•Off

Limitation

❒Enter [Scope ID] using up to 31 alphanumeric characters.

Note

❒Default: Off

❖SCSI print (SBP-2)

When you print using the SCSI print client function supported by Windows 2000/XP, or Windows Server 2003, you must set [SCSI print (SBP-2)].

•Active

•Inactive

Limitation

❒The IEEE 1394 interface can be used when Windows 2000 Serv- ice Pack 1 or later is installed. If the Service Pack is not installed, only one SCSI print device is connectable via 1394 bus.

Note

❒Default: Active

❖Bidirectional SCSI print

Specifies the printer's response mode etc. for status requests when using the IEEE 1394 interface.

• On

• Off

Note

❒Default: On

❒If this is set to [Off], bidirectional communication will not work.

40

❖IP over 1394

When you use the IP over 1394 func- tion of the IEEE 1394 interface to connect the machine to the network, or you print from computer with the IP over 1394 driver, you must speci- fy [Active]for [IP over 1394].

•Active

•Inactive

Limitation

❒Printing with IP over 1394 is pos- sible under Windows Me/XP and Windows Server 2003

Note

❒Default: Active