Ricoh Network Guide Note, Note, [OK], Note, [Exit], [Name], [E-mail, [Change], Address ], [Fax Number], B Press [Exit], [Company Name], [Department Name], A Press [TNext]twice

Connecting and Setting Up

Note

❒The user name and password are required for administrator access to the LDAP server.

❒You can set the user name and password in this machine’s Ad- dress Book to allow individual

2	authentication access to the
	LDAP server. Use Administra-
	tor Tools to select the user name

and password you want to use. For details, see General Settings Guide.

To test the connection

Access the LDAP server to check the proper connection is established. Check authentication works according to the authentication settings.

A Press [Connection Test].

A connection test is carried out.

B Press [Exit].

Note

❒If the connection test fails, check your settings and try again.

❒This function does notcheck search conditions or the search base.

To set search conditions

You can enter an attribute as a typical search keyword. Using the entered at- tribute, the function searches the LDAP server’s Address Book.

A Press [TNext]twice.

B Press [Change] for items you want to use as search conditions from the following: [Name], [E-mail Address ], [Fax Number], [Company Name], and [Department Name].

C Enter the attribute you want to use when searching for e-mail address- es, and then press [OK].

Note

❒The attribute value may change depending on the server envi- ronment. Check the attribute value complies with your server environment before setting it.

❒You can leave items blank, but you cannot leave attributes blank when searching for e-mail addresses from the LDAP serv- er Address Book.

54