Monitoring and Configuring the Printer

rendezvous

Use the “rendezvous” command to display rendezvous-related settings.

❖View settings

Rendezvous settings are dis- played.

msh> rendezvous❖Current computer name displaymsh> rendezvous cname

 

❖ Display information about the current

4

printer location

 

 

msh> rendezvous location
❖Setting order of priority for each pro- tocol

•diprint

msh> rendezvous diprint {0–99}

•lpr

msh> rendezvous lpr {0– 99}

•ipp

msh> rendezvous ipp {0– 99}

You can specify the order of priority for “diprint”, “1pr”, and “ipp”. Smaller numbers indicate higher priority.

❖Rendezvous computer name setting

You can specify the rendezvous computer name.

msh> rendezvous cname “computer name”

•The computer name can be en- tered using up to 63 alphanu- meric characters.

❖IP TTL settingmsh> rendezvous ipttl {1- 255}

You can specify the IP TTL (the number of routers a packet can pass through).

Note

❒The default is 255.

❖rendezvous Installation location infor- mation setting

You can enter information about the location where the printer is in- stalled.

msh> rendezvous location “location”

•Information about location can be entered using up to 32 alpha- numeric characters.

❖Resetting the computer name and lo- cation information

You can reset the computer name and location information.

msh> rendezvous clear {cname location}

•cname

Reset the computer name. The default computer name will be displayed when the computer is restarted.

•location

Reset the location information. The previous location informa- tion will be deleted.

98