Ricoh Network Guide Note, Note, [On], [Off], [Edit], [File], [Group], [Finish], Reference, Reference, F Click [OK], [Add New User], [Set By Group], [Apply Settings]

Using SmartDeviceMonitor for Admin

Setting Applicable Functions to New Users

Follow the procedure below to add new users and set functions applicable to them.

A Start SmartDeviceMonitor for Admin User Information Management Tool.

B Click the [Access Control List] tab of User Management Tool.C On the [Edit] menu, click [Add New User].D Enter the user code and user name.E Select the check box of the functions applicable to the new user.

Note

❒If the check boxes are unavaila- ble, there is no restriction to use that function. For details, see SmartDeviceMonitor for Ad- min Help.

F Click [OK].The new user is added.

G On the [Edit] menu, click [Apply Settings].

The settings are applied.

H Click [Finish] on the [File] menu to quit User Management Tool.

Reference

For details about setting restric- tions, see SmartDeviceMonitor for Admin Help.

Configuring the Energy Saver Mode

Follow the procedure below to configure Energy Saver mode.

A Start SmartDeviceMonitor for Admin.

B On the [Group] menu, point to [Search Device], and then click [TCP/IP], [IPX/SPX] or [TCP/IP(SNMPv3)].

A list of machines using the selected protocol appears.

Note 4

❒Select the protocol of the ma- chine whose configuration you want to change.

❒If you are using TCP/IP SNMP v3, enter the user authentica- tion.C Select the machine whose settings you want to make.To make settings for all machines in the selected group, select no ma- chine.

D On the [Group] menu, point to [Energy Save Mode], point to [Set Individually ] to make the settings for only the selected machine or point to [Set By Group] to make the settings for all machines in the selected group, and then click [On] or [Off].

E Quit SmartDeviceMonitor for Admin.

Reference

For details about the setting value for Energy Saver mode, see SmartDeviceMonitor for Ad- min Help.

81