Ricoh Network Guide key, C Press [OK], C Press [Yes], B Press [Exit], C Press [Exit], A Press [Delete], [Identification Name], To enter a server name

LDAP Server Settings

To finish programming/changing the LDAP ServerA Press [Change] after setting each item.B Press [Exit].C Press [Exit].D Press the {User Tools/Counter/Inquiry}

key.

Programming the LDAP Server

To enter an identification name

Register a name for the LDAP server
that will appear on the server selection	2
screen of the LDAP search operation.

A Press [Change] under [Identification Name].B Enter the server’s identification name. C Press [OK].To enter a server name

To delete the programmed LDAP serverA Press [Delete].

Register the LDAP server’s host name or IP address.

A Press [Change] under [Server Name]. B Enter the LDAP server name.

C Press [OK].

B Select the LDAP server you want to delete.C Press [Yes].

51