Using a Printer Server

T Select the [Define additional properties ] check box, and then click [Create].

U Click [Assignments], and then click [Add] in the [Assignments] area.

V In the [Available objects] box, click the queue you created, and then click [OK].

3W Check the settings, and then click

[OK].

X Start the print server by entering the following from the console of the NetWare server.

If the print server is in operation, quit and restart it.❖To exitCAREE: unload pserver❖To startCAREE: load pserver print_server_name

Setting Up as a Remote Printer (NetWare 3.x)

Follow the procedure below to use the printer as a remote printer under NetWare 3.x.

Setting up using NIB Setup Tool

A Log on to the file server as a supervisor or supervisor equivalent.

B Start NIB Setup Tool from [Start] menu.

C Click [Property Sheet], and then click [OK].

D Select a printer you want to con- figure.

E On the [NetWare] tab, enter the name of the print server in the [Print Server Name:] box.

F In the [File Server Name:] box, enter the name of the file server in which a print server is created.

You can also click [Browse...] to browse through available file serv- ers.

G In the [Print Server Operation Mode] area, click [As Remote Printer].

H In the [Remote Printer No.] box, enter the printer number.Use the same printer number created in the print server.I A confirmation message appears. Click [OK].J On the [NIB] menu, click [Exit].Setting up using PCONSOLEA Enter “PCONSOLE” from the command prompt.F:> PCONSOLEB Create a print queue.

When using the existing print queue, go to the procedure for creating a printer.

C From the [Available Options] menu, select [Print Queue Information], and then press the {Enter} key.

D Press {Insert} key, and then enter a print queue name.E Press {ESC} key to return to the [Available Options] menu.F Set up the network connection to a printer.

64