Ricoh Network Guide [Network], Reference, [LAN Type], ad hoc mode, [IEEE 802.11b], [Interface Set- tings], Confirming the Connection, ❖When using in infrastructure mode

Connecting and Setting Up

	❖ When using in ad hoc mode/802.11
Confirming the Connection
	ad hoc mode

A Make sure the LED of the IEEE 802.11b interface unit is lit.

❖When using in infrastructure mode

2

1

2

ZZZ024S

1.If [LAN Type] on the [Interface Set- tings]/[Network] screen is not set to [IEEE 802.11b], it does not light, even if the main power is on.

2.If it is connected properly to the network, the LED is green when in infrastructure mode. If the LED is blinking, the machine is searching for devices.

1

2

ZZZ024S

1.If the IEEE 802.11b interface unit is working, it is lit in orange.

2.If it is connected properly to the network, the LED is green when in ad hoc mode or 802.11 ad hoc mode. If the LED is blinking, the machine is searching for devices. The LED will light after a few seconds.

B Print the configuration page to verify settings.

Reference

For more information about printing a configuration page, see Printer Reference.

12