Ricoh Network Guide Note, [OK], Note, [On], Note, [On], C Press [OK], A Press [On], To enter a port number, B Enter the search base, To enter the search base

Connecting and Setting Up

To enter the search base

Select a route folder defined by the LDAP server to start the search from e-mail addresses registered in the selected folder are search targets.

2A Press [Change] under [Search Base].B Enter the search base.

Note

❒For example, if the search target is the sales department of ABC company, enter “dc=sales de- partment, o=ABC”. (In this ex- ample, the description is for an active directory. “dc” is for the organization unit, and “o” is for the company.)

❒Search base registration may be required depending on your server environment. When reg- istration is required, unspeci- fied searches will result in error. Check you server environment and enter any required specifi- cations.

C Press [OK].

To enter a port number

Specify the port number for communicating with the LDAP server. Specify a port that is compliant with your environment.

A Press [Change] under [Port No.].B Enter the port number using the number keys, and then press [#].

Note

❒When SSL is set to [On], the port number automatically changes to “689”.

❒This function supports the TLS v1, SSL v3 and v2.

To start SSL communication

Use SSL to communicate with the LDAP server.

A Press [On].

Note

❒To use SSL, the LDAP server must support SSL.

❒When SSL is set to [On], the port number automatically changes to “689”.

❒SSL setting must be enabled on this machine. For details, consult your network administrator.

52