Precautions

NetWare Printing

Form feed

You should not configure form feed on NetWare. Form feed is controlled by the printer driver on Windows. If NetWare form feed is configured, the printer might not work properly. If you want to change form feed set- tings, always configure them using Windows.

Under Windows 95/98/Me, clear the [Form feed] check box on the

[Printer Settings] tab in the printer properties dialog box.

Under Windows 2000/XP and Win- dows Server 2003, clear the [Form feed] check box on the [NetWare Set- tings] tab in the printer properties di- alog box.

Under Windows NT 4.0, clear the [Form feed] check box on the [Net- Ware Settings] tab in the printer properties dialog box.

Banner page

You should not configure a banner page on NetWare. If you want to change the banner page setting, always configure it using Windows.

Under Windows 95/98/Me, clear the [Enable banner] check box on the

[Printer Settings] tab in the printer properties dialog box.

Under Windows 2000/XP and Windows Server 2003, clear the [Enable banner] check box on the

[NetWare Settings] tab in the printer properties dialog box.

Under Windows NT 4.0, clear the [Enable banner] check box on the

[NetWare Settings] tab in the printer properties dialog box.

6

Printing after resetting the machine

After resetting the remote printer, the connection from the print server will be cut off for about 30-40 seconds before re-connecting. Depending on the NetWare specification, print jobs may be accepted, but they will not be printed during this interval.

When using the machine as a remote printer, wait about two minutes after resetting before attempting to print.

143