Message List

Message List

This is a list of messages that appear in the printer's system log. The system log can be viewed using the "syslog" command.

System Log Information

Use the following command to display the system log information:•UNIX: Use the "syslog" command and "rsh", "rcp", and "ftp" parameters.•telnet : Use the “syslog” command.

Message

Problem and solutions

 

 

 

 

 

 

Access to NetWare server <file server name>

(In the print server mode) Login to the file

 

4

denied. Either there is no account for this print

server failed. Make sure that the print server is

 

 

server on the NetWare server or the password

registered on the file server. If a password is

 

 

was incorrect.

specified for the print server, delete it.

 

 

 

 

 

 

add_sess: bad trap addr:<IpAddress>, com-

The IP address (0.0.0.0.) is unavailable when

 

 

munity:<community name>

the community access type is TRAP. Specify

 

 

 

the host IP address for the TRAP destination.

 

 

 

 

 

 

add_sess: community<community name> al-

The same community name already exists.

 

 

ready defined.

Use another community name.

 

 

 

 

 

 

add_sess_ipx: bad trap addr: <IPXaddress>,

The IPX address (00:00:00:00:00:00) is unavail-

 

 

community:<community name>

able when the community access type is

 

 

 

TRAP. Specify the host IPX address for the

 

 

 

TRAP destination.

 

 

 

 

 

 

add_sess_ipx: community <community

The same community name already exists.

 

 

name> already defined.

Use another community name.

 

 

 

 

 

 

ANONYMOUS FTP LOGIN FROM <IP ad-

An anonymous login has been made with a

 

 

dress>, <password>

password <password> from the host <IP ad-

 

 

 

dress>.

 

 

 

 

 

 

anpd start. (AppleTalk)

The ANPD (AppleTalk Network Package Dae-

 

 

 

mon) service has started.

 

 

 

 

 

 

Attach FileServer= <file server name>

Connection to the file server as the nearest

 

 

 

server has been established.

 

 

 

 

 

 

Attach to print queue <print queue name>

(In the print server mode) Attached to the

 

 

 

print queue.

 

 

 

 

 

 

Cannot create service connection

(In the remote printer mode) Connection to the

 

 

 

file server has not been established. The

 

 

 

number of file server users may have exceeded

 

 

 

the maximum capacity of the file server.

 

 

 

 

 

 

Cannot find rprinter (<print server

The printer with the number displayed on the

 

 

name>/<printer number>)

print server does not exist. Make sure that the

 

 

 

printer number is registered on the print server.

 

 

 

 

 

 

Change IP address from DHCP Server.

The IP address changes when DHCP lease is re-

 

 

 

newed. To always assign the same IP address,

 

 

 

set a static IP address to the DHCP server.

127