Ricoh Network Guide Note, [On], [On], Note, [OK], Next], press, A Press [TNext], [High Security], [High Security], [High Security], A Press [TNext], To set authentication

LDAP Server Settings

To set authentication

To make a search request to the LDAP server, use the administrator account for authentication.

For details about the administrator account, see “To enter the user name and password”.

A Press [TNext].B Press [On] or [High Security] under [Authentication].

Note

❒Authentication settings must comply with your server’s au- thentication settings. Check your server settings before set- ting this machine.

❒[High Security] is available only with LDAP Version 3.0.

❒When [High Security] is selected, the administrator password is encrypted before it is sent to the network. When [On] is selected, the password is sent without encryption.

To enter the user name and password

When [On] or [High Security] is selected for the authentication setting, use the administrator account name and password. Do not enter the administrator account name and password 2 when using authentication for each individual or each search.

A Press [TNext].

B Press [Change] under [User Name].C Enter the user name, and then press [OK].

Note

❒Procedures for the user name setting differ depending on server environment. Check your server environment before making the setting.

•Example setting procedures: Domain Name\User Name User Name@Domain Name CN=Name, OU=Department Name, DC=Server Name

D Press	[Change] under [Password].
E Enter	the password, and then
press	[OK].

53