Using a Printer Server

E Enter the printer name in the [Device name:] box and a comment in the [Comment] box, and then click

 

[Next].

 

F Select the [NetWare] check box,

 

and then click [Next].

 

G Click [Bindery mode], enter the file

 

server name in the [File Server

 

Name:] box, and then click [Next].

3

In the [File Server Name:] box, enter

the name of the file server in which a print server is created. You can also click [Browse...] to browse through available file servers.

H Enter the print server name in the [Print Server Name:] box, the printer name in the [Printer Name:] box, and the print queue name in the [Print Queue Name] box, and then click [Next].

•In the [Print Server Name:] box, enter the name of the NetWare print server using up to 47 char- acters.

•In the [Printer Name:] box, enter the name of the NetWare printer.

•In the [Print Queue Name] box, en- ter the name of the print queue to be added to NetWare.

I Check the settings, and then click [Next].The settings are applied, and NIBSetup Tool quits.J Turn the printer off and then on again.

Note

❒To check that the configuration is made correctly, enter the fol- lowing from the command prompt.

F:> USERLIST

❒If the printer works as config- ured, the name of the print serv- er appears as a connected user.

❒If you cannot identify the print- er you want to configure, check the printer name with the con- figuration page printed from the printer. For details about printing a configuration page, see Printer Reference.

❒If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer.

Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)

Follow the procedure below to connect the printer as a print server using NetWare 4.x, NetWare 5/5.1, or Net- Ware 6/6.5.

Important

❒When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or NetWare 6/6.5, set it to the NDS mode.

❒When using NetWare 5/5.1 or NetWare 6/6.5, set the printer as a print server.

A Log on to the file server as a supervisor or supervisor equivalent.

B Start NIB Setup Tool on the [Start] menu.

C Click [Wizard], and then click [OK].

D Select a printer you want to con- figure.

60