Assign print queues to the created printer.
From [Print Server Configuration Menu], select [Queues Serviced By Printer].

Using NetWare

G On the [Available Options] menu, click [Print Server Information], and then press the {ENTER} key.

H To create a new print server, press the {INSERT} key, and then enter a print server name.

For a currently defined print serv- er, select a print server in the [Print Server] list.

Use the same printer name specified using NIB Setup Tool.

I From the [Print Server Information] menu, select [Print Server Configuration ].

J From the [Print Server Configuration] menu, select [Printer Configuration].

K Select the printer indicated as [Not Installed].

Use the same printer number specified as the remote printer number using NIB Setup Tool.

L To change the printer name, enter a new name.

Aname “Printer x” is assigned to the printer. The “x” stands for the number of the selected printer.

M As type, select [Remote Parallel, LPT1].

The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured.

N Press the {ESC} key, and then click [Yes] on the confirmation message.

O Press the {ESC} key to return to [Print Server Configuration Menu].

P

Q

R Select the printer created.

S Press the {INSERT} key to select a queue serviced by the printer.

You can select several queues.

T Follow the instructions on the screen to make other necessary settings.

Following these steps, check that

3

the queues are assigned.

 

U Press the {ESC} key until "Exit?" appears, and then select [Yes] to exit PCONSOLE.

V Start the print server by entering the following from the console of the NetWare server.

If the print server is in operation, quit and restart it.

❖To quit

CAREE: unload pserver

❖To start

CAREE: load pserver print_server_name

Note

❒If the printer works as config- ured, the message "Waiting for job" appears.

65