Using SmartDeviceMonitor for Admin

Checking the Machine StatusFollow the procedure below to check machine status.

A Start SmartDeviceMonitor for Admin.

B On the [Group] menu, point to [Search Device], and then click [TCP/IP], [IPX/SPX] or [TCP/IP(SNMPv3)].

The status of machines is indicated by icons in the list.

Note

For details about status icons, see SmartDeviceMonitor for Admin Help.

If you are using TCP/IP SNMP v3, enter the user authentication.

C To obtain status details, click the machine in the list, and then click [Open] on the [Device] menu.

The machine status appears in the dialog box.D QuitSmartDeviceMonitor for Admin.

Note

For details about items in the di- alog box, see SmartDeviceMon- itor for Admin Help.

Changing Names and CommentsFollow the procedure below to change the names and comments of the machine.

A Start SmartDeviceMonitor for Admin.

B On the [Group] menu, point to [Search Device], and then click [TCP/IP], [IPX/SPX] or [TCP/IP(SNMPv3)].

A list of machines using the selected protocol appears.

Note

4

Select the protocol of the ma- chine whose configuration you want to change.

If you are using TCP/IP SNMP v3, enter the user authentication.

C Select a machine in the list.

D On the [Tools] menu, click [NIB Set-

up Tool].

A Web browser opens and the dialog box for entering the password for the Web Image Monitor administrator appears.

NIB Setup Tool starts when the network interface board is default. Click [Web Browser], and then click [OK].

E Enter the user name and password, and then click [OK].Top Page of Web Image Monitor ap- pears.

For details about the user name and password, consult your network administrator.

F Click [Configuration].

G Click [Device Settings].

83