Ricoh Network Guide msh> show, msh> slp ttl “ttl_val”, • The default value of TTL is 1. A, search is executed only within a lo, Use “slp” command to configure SLP settings

Remote Maintenance by telnet

•If Secured Sockets Layer (SSL, an encryption protocol) func- tion is not available for the printer, you cannot use the function by enabling it.

msh> set nrs {up down} msh> set rfu {up down} msh> set ipp {up down} msh> set http {up down} msh> set rendezvous {up down}

show

Use the "show" command to display network interface board configuration settings.

❖View settings

msh> show•If "-p" is added, you can view settings one by one.

Reference

slp

Use “slp” command to configure SLP settings.msh> slp ttl “ttl_val”

•You can search the NetWare server using SLP in the PureIP environ- ment of NetWare 5/5.1 and Net- ware 6/6.5. Using the "slp" command, you can configure the value of TTL which can be used by SLP multicast packet.

• The default value of TTL is 1. A	4
search is executed only within a lo-

cal segment. If the router does not support multicast, the settings are not available even if the TTL value is increased.

•The acceptable TTL value is be- tween 1 and 255.

For details about the information displayed, see p.122 “Configuring the Network Interface Board”.

101