
Monitoring and Configuring the Printer
Setting a Password
Follow the procedure below to set a
password.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search
Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
4
❒ If you are using TCP/IP SNMP
v3, enter the user authentication.
C In the list, select a machine whose
configuration you want to change.
D On the [Tools] menu, click [NIB Set-
up Tool].
A Web browser opens and the dia-
log box for entering the password
for the Web Image Monitor admin-
istrator appears.
NIB Setup Tool starts when the
network interface board is default.
Click [Web Browser], and then click
[OK].
E Enter the user name and pass-
word, and then click [OK].
For details about the user name
and password, consult your net-
work administrator.
Top Page of Web Image Monitor
appears.
82
F Click [Configuration].
G Click [Device Settings].
H Click [Program/Change Administrator].
I Click [Change].
J On the [New Password], enter a pass-
word.
Enter the same password in [Con-
firm Password] .
K Click [OK].
L Quit Web Image Monitor.
M Quit SmartDeviceMonitor for Admin.