Monitoring and Configuring the Printer

Monitoring and Configuring the Printer

132

4

Note

❒

For details about UNIX commands and parameters, see 

UNIX Supplement

.

❒

For details about “syslog” command, see p.106 “syslog”.

snmpd start.

The snmpd service has started.

started.

The direct print service has started.

Started.

The rendezvous function is enabled.

Terminated.

The rendezvous function is disabled.

Terminated. (PS not found)

The rendezvous function is disabled because 

PS is not found.

The print server received error <error 

number> during attempt to log in to the net-

work. Access to the network was denied. Ver-

ify that the print server name and password 

are correct. 

Login to the file server failed. The print server 

is not registered or a password is specified. 

Register the print server without specifying a 

password.

WINS name refresh :Server No Response

There was no response to the update request 

from the print server. Check that the WINS 

server address is correct and the WINS server 

is working properly.

WINS name registration/refresh error 

code(errornumber)

Set unique NetBIOS names.

Check that the WINS server address is correct 

and the WINS server is working properly.

WINS name registration:Server No Response

There was no response to the registration re-

quest from the server. Check that the WINS 

server address is correct and the WINS server 

is working properly.

WINS server address0.0.0.0

The WINS server was not specified. Specify 

the WINS server address to match the printer 

name with WINS.

WINS Server=<WINS server address> NetBI-

OS Name=<NetBIOS name>

The printer name was successfully registered.

WINS wrong scopeID

The scope ID is incorrect.

Specify the correct scope ID.

Message

Problem and solutions

Page 138
Image 138
Open full-size image