Basic Operations

Powering Off the Projector

1.Press the “Power” and you will see a message as below on the on-screen display.

2.Press the “Power” again to turn off the projector lamp.

3.The cooling fan continues to operate for about 60 seconds for cooling cycle and the Power indicator will flash red. After cooling down, the light stops flashing, and then the projector will enter the standby mode.

If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “Power” to restart the projector.

4.Disconnect the power cord from the electrical outlet and the projector.



English