Ricoh PJ X5260 Using the On Screen Display (OSD), How to operate, settings

User Settings

Using the On Screen Display (OSD)

The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of

settings.

How to operate

1.To open the OSD, press “Menu” on the Control Panel or Remote

Control.

2.When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press

key to enter sub menu.

3.Use keys to select the desired item in the sub menu and

press “Enter” to adjust the settings by or key. To exit from adjusting the item, press “Enter” again.

4.If “to setting” word is shown in the setting, you can press “Enter” to enter another sub menu. Press “Menu” to close the sub menu after adjustment.

5.After adjusting the settings, press “Menu” to go back to the main menu.

6.To exit, press “Menu” again. The OSD will be closed.

Note

If no button opera- tion is made for 10 seconds, the OSD will be closed auto- matically.

Main Menu Setting

Sub Menu

9

English