Controls via Network

How to use web browser to control your projector

Note

Be sure to set “Control Method” to “LAN” before starting to set Network setting.

Set “Standby Energy 1. Saving” to “Low” if you want to turn on the projector from web browser.

Check IP address in Default setting 2 > Network setting menu in OSD. (See page 42)

2.Open your web browser and type in the IP address you checked. For example, type “http://192.168.0.100” when IP address is displayed as the screen above. Then the web page will display as below:

2.1 Login:

Note

- This web page is available only in English.

- The default pass- word for “Admin- istrator” is “admin” and the default password for “User” is “user”.

PJ X5260

2.1-1 Select a user. “Administrator” is with high authority that can process more operations such as network setting and alert setting. And “User” is with normal authority.

2.1-2 Input your password. (See note for the default pass- word.)

2.1-3 Click “Login” button to login. There will be a prompt if your password is wrong. With correct password, you can enter to control pages.

2.2Home: This is a web page which shows basic information of your projector. There are 5 tabs and you can click a tab for specific controls. For more information, you can download a manual of web control function from download page of the following URL.

http://www.ricoh.com/

PJ X5260



English