User Settings

Start-up Screen

Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.

On: Display the startup screen.

Off: No logo is displayed.

User Logo

User logos can be displayed in the start-up screen or as the background when there are no input signals.

Note

It takes up to 120 seconds to capture the picture. This may vary by resolution of the input signal.

Register Logo: Project the image to be registered as a user logo, and then execute this function.

How to capture the image:

1.Find the image from input source.

2.Project the image.

3.Choose [Register Logo --> Execute], and select [OK]

4.Start capturing the screen.

5.When finished, it will show the message below.



English