User Settings

Default Settings 1

Note

If [Power on Meth- od] is set to [Auto], then if the power is supplied when re- stored after a power outage, the projector will come on.

Power Off on No Signal

Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished.

Auto Input Search

When this function is turned “On”, the projector will search for other signals if the current input signal is lost. When this function is turned “Off”, it will only search a specified connection port.

Power On Method

Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the main power switch is turned on (Auto).

Standby Energy Saving

High: Choose “High” to save standby power (less than 0.5W). Monitor Out port and LAN control function will be disabled in standby mode.

Low: Choose “Low” to return to normal standby mode.

Lamp Power

Eco: Choose “Eco” to lower lamp power consumption and extend the lamp life.

Stnd: Standard mode.



English