User Settings

Default Settings 2 Network Setting

Note

Be sure to set “Control Method” to “LAN” before start- ing to set Network setting.

Connection Status

Display the network connection status.

MAC Address

Display MAC address.

DHCP

If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open.

Enable: Assign network settings to the projector from a DHCP server automatically.

Disable: Assign network settings such as an IP address manu- ally.

IP Address

Set an IP address . Using number key on the remote control. Or display IP address provided from DHCP server when DHCP is set to “Enable”.

Subnet Mask

Set subnet mask number. Using number key on the remote con- trol. Or display IP address provided from DHCP server when DHCP is set to “Enable”.

Default Gateway

Set the default gateway of the network connected to the projector. Using number key on the remote control. Or display IP address provided from DHCP server when DHCP is set to “Enable”.



Set

Select “OK” to apply the setting.

English