Ricoh Type 2018 2. Troubleshooting, Error & Status Messages on the Display

This section describes the principal messages that appear on the display. If a message not described here appears, act according to the message.

Reference

Before turning the main power off, see ‘Turning On the Power’, Copy Reference .

❖Status messages

Message	Status

Hex Dump Mode	In Hex Dump mode, the machine prints received data in hexa-
	decimal format. After printing, turn off the machine and then
	back on again. Hex Dump mode is used for advanced trouble-
	shooting.

Offline	The machine is offline. To start printing, switch the machine
	online by pressing {Online} on the control panel.

Please wait.	Wait a while.

Printing...	The machine is printing. Wait a while.

Ready	This is the default ready message. The machine is ready for
	use. No action is required.

Resetting job...	The machine is resetting the print job. Wait until “Ready” ap-
	pears on the display.

Setting change…	The machine settings are being changed. Wait a while.

Waiting...	The machine is waiting for the next data to print. Wait a while.