Printer Features Parameters
System
❖Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
•On
•Off
Note
❒Default: Off
❖Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues after a system error oc- curs.
• Off
• 0 minutes
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
Note
❒Default: Off
❖Memory Overflow
Select this to have a memory over- flow error report printed.
• Not Print
• Error Report
Note
❒Default: Not Print
•Frame Priority
This setting uses frame memory for high speed printing.
Note
❒ Default: Frame Priority
❖Duplex
You can select to have print on both sides of each page.
• Off
• Long Edge Bind | 3 |
•Short Edge Bind
Note
❒Default: Off
❖Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has been specified with the printer driver or another command.
• 1 to 999 by 1
Note
❒Default: 1
❖Edge Smoothing
Set this to enable Edge Smoothing.
• On
• Off
Note
❒Default: On
❒If Toner Saving is set to On, Edge Smoothing is ignored even if it is set to On.
❖Memory Usage
You can select the amount of mem- ory used in Font Priority or Frame Priority, according to paper size or resolution.
•Font Priority
This setting uses memory for registering fonts.
❖Toner Saving
Set this to enable Toner Saving.
•On
•Off
Note
❒Default: Off
31