122XL Copper Cutting and Prep Machine
General Safety Information
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
•Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while operating a tool. Distractions can cause you to lose control.
•Guard or barricade the area when workpiece extends beyond machine. A guard or barricade that provides a minimum of three (3) feet clearance around the workpiece will reduce the risk of entanglement.
Electrical Safety
•Grounded tools must be plugged into an outlet, properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a quali- fied electrician if you are in doubt as to whether the outlet is properly grounded. If the tool should elec- trically malfunction or break down, grounding pro- vides a low resistance path to carry electricity away from the user.
Cover of
grounded 
outlet box
Grounding prong | Grounding prong |
•Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electrical shock if your body is grounded.
•Don’t expose electrical tools to rain or wet condi- tions. Water entering a tool will increase the risk of electrical shock.
•Do not abuse cord. Never use the cord to pull the
plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electrical shock.
•When operating a tool outside, use an outdoor extension cord marked
•Use only
•Use proper extension cords. (See chart.) Insuffi- cient conductor size will cause excessive voltage drop and loss of power.
Minimum Wire Gauge for Extension Cord
Nameplate |
| Total Length (in feet) | |||
Amps |
| ||||
|
|
|
| ||
|
| 0 – 25 |
| 26 – 50 | 51 – 100 |
0 | – 6 | 18 AWG |
| 16 AWG | 16 AWG |
6 | – 10 | 18 AWG |
| 16 AWG | 14 AWG |
10 | – 12 | 16 AWG |
| 16 AWG | 14 AWG |
12 | – 16 | 14 AWG |
| 12 AWG | NOT RECOMMENDED |
|
|
|
|
|
|
•Keep all electric connections dry and off the ground. Do not touch plugs or tool with wet hands. Reduces the risk of electrical shock.
Personal Safety
•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medications. A moment of inat- tention while operating power tools may result in seri- ous personal injury.
•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
•Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch ON invites accidents.
•Remove adjusting keys or switches before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
•Do not overreach. Keep proper footing and bal- ance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
2 | Ridge Tool Company |
