RIDGID K6200 manual Description, Specifications and Standard Equipment

K-6200 Drain Cleaning Machine

•Only use the K-6200 to clean drain lines 3″ to 6″ in diameter. Follow instructions on the use of the machine. Other uses or modifying the drain cleaner for other applications may increase the risk of injury.

Description, Specifications and Standard Equipment

Description

The RIDGID K-6200 Drain Cleaning Machine will clean drain lines 3″ to 6″ in diameter and up to 200 feet in length. The 4/10 HP universal motor spins 5/8″ cable at 285 RPM. When the cable hits the blockage, the motor gears down automatically to deliver greater power and enhance operator control.

The molded polyethylene drum includes an inner drum that guards against cable flip-over. An integral Ground Fault Interrupter (GFCI) is built into the line cord and a “kickstand” base is provided for machine stability during operation. A pneumatic foot actuator provides ON/OFF control of the motor.

The drum powers a 5/8″ inner core cable that has a quick change coupling system for connecting or disconnecting tools. The cable is fed in and out of the drain by a power feed assembly at a rate of 0-28 feet/min. An integral torque limiter will cause the drum to stop rotating whenever excessive torque is created when the cutting tool at- tached to the cable hits a snag and stops rotating.

The K-6200 can also be adapted to utilize the K-3800 drum with a 1/2″ cable to clean drain lines 2″ to 4″ in di- ameter and up to 90′ in length.

Specifications

Line Capacity	3″ – 6″ Lines, Up To 200 feet
Drum Capacity	100′ of 5/8″ Cable
Motor:
Type	115V/60 Hz, Reversible,
	Universal AC Motor
Rating	4/10 HP, 285 RPM
Amps	5.6
Weight (Machine &
100 ft of Cable)	180 lbs.
Length	291/2″
Height	43.5″ (max)
Width	19″

Standard Equipment

Machine Options – Power Feed

Catalog No.		Model
115V	220-240V	No.	Description
95737	95852	K-6200	Machine w/5/8″ Pigtail &
			Standard Accessories
95732	—	K-6200	Machine, Standard Accessories and
		w/C-24	5/8″ x 100′ Inner Core Cable
93557	—	K-6200	Machine, Standard Accessories and
		w/C-24-IW	5/8″ x 100′ IW Solid Core Cable

Standard Accessories

•T-406 Grease Blade

•T-411 2″ Double Cutter

•T-413 3″ Double Cutter

•T-414 4″ Double Cutter

•Gloves, Tool Box

•Machine Legs (2)

Figure 1 – Standard Equipment Included In All Machine Options

Optional Accessories

Catalog No. Description

•95797 Lifting Hook

•95792 Swivel Loading Wheel Assembly

•95802 K-6200 Drum Assy. w/5/8″ Pigtail

•95807 K-3800 Drum Assy. w/6200 Adapters

•95822 K-3800 to K-6200 Adapter Kit Only

•59982 Cable Rust Inhibitor 1 Qt.

•59987 Cable Rust Inhibitor 1 Gal.

4 Ridge Tool Company