Model
•Use only accessories that are recommended by the manufacturer for your tool. Accessories that may be suitable for one tool may become hazardous when used on another tool.
•Inspect tool and extension cords periodically and replace if damaged. Damaged cords increase the risk of electrical shock.
•Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.
•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the unit. These preventative safety measures reduce the risk of accidentally starting the unit.
Service
•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury.
•When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electrical shock or injury.
•Disconnect all power from the unit before servic- ing. Eliminates the risk of electrical shock and accidental starting.
Specific Safety Information
WARNING
Read this operator’s manual carefully before using the Pipe Thawing Tools. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury.
Call the Ridge Tool Company, Technical Service Depart- ment at (800)
Tool Safety
•Tool is made to thaw frozen iron or copper water pipes. Follow the instructions on proper use. Other uses may increase the risk of injury.
•Do not leave the unit unattended while thawing. Such preventive measures reduce the risk of injury or fire.
•Do not touch the clamp tips or cable connections. Reduces the risk of burns.
•Do not operate unit with housing removed. Exposure to internal parts may result in injury.
•Make both pipe connections before plugging in unit. Prevents electrical arcing between the clamps and the pipe.
•Use cable and clamps provided with unit. Incorrect cables may result in overheating of the wires.
•Keep clamps away from combustible materials or articles that can be damaged by heat. Clamp tips be- come hot during use.
Description and Specifications:
Description
The RIDGID Pipe Thawing Machines are
This method does not require that you know exactly where the frozen section is nor do you have to have direct access to the area. The
Specifications
Line Capacity:
Primarily recommended for all indoor copper or steel pipes from 1/2″ to 11/2″ . Thawing units will not work with plastic pipe or lines containing plastic or rubber couplings.
Thawing Unit: |
|
|
Input | 115 Volts, | 15 Amps |
|
|
|
Output | 6.0 Volts | 4.5 - 7.6 Volts |
Output | 300 Amps | 300 Amps |
Minimum Reach | 15′ | 4′ |
Maximum Reach | 75′ | 150′ |
Weight | 25 lbs | 29 lbs |
Weight | 11.4 kgs | 13.2 kgs |
Ridge Tool Company | 3 |
