RIDGID kt-190 Service and Repair, Electrical Schematics, KT-190 Thawer 115V/60Hz, KT-200 Thawer

Model KT-190 and KT-200 Pipe Thawing Units

Service and Repair

WARNING

Service and repair work on this tool must be performed by qualified repair personnel. Thawing unit should be taken to a RIDGID Independent Authorized Service Center or re- turned to the factory. All repairs made by Ridge service facilities are warranted against defects in material and workmanship.

When servicing this tool, only identical replacement parts should be used. Failure to follow these instructions may create a risk of electrical shock or other serious injury.

If you have any questions regarding the service or repair of this machine, call or write to:

Ridge Tool Company

Technical Service Department

400 Clark Street

Elyria, Ohio 44035-6001

Tel: (800) 519-3456

E-mail: TechServices@ridgid.com

For name and address of your nearest Independent Authorized Service Center, contact the Ridge Tool Com- pany at (800) 519-3456 or http://www.ridgid.com

Electrical Schematics

KT-190 Thawer 115V/60Hz

OUTPUT

TERMINALS

KT-200 Thawer	OUTPUT
115V/60Hz
	TERMINALS

10 Ridge Tool Company