RIDGID WD55000 owner manual Diffuser Cap Assembly, Hoses 14 Foot Tug-A-Long & 7 Foot Super Flex

SP6625 5 gallon RIDGID 9/16/05 2:25 PM Page 13

Hoses (14 Foot Tug-A-Long & 7 Foot Super Flex)

The 14 Foot Tug-A-Long Hose and the 7 Foot Super Flex Hose have an adaptor that can be used to connect the hose to the vacuum port on the vac or to the male end of another hose. Both 7 foot and 14 foot hoses can be used connected togeth- er or independently from one another.

Both the 7 foot and 14 foot hoses have a locking adaptor at one end that will connect to the vac, and a friction fit at the other end, which will connect to all the 1-7/8 inch accessories or a second hose.

To connect these two hoses together, first connect the 14 foot hose to the wet/dry vac. Next connect the 7 foot hose to the 14 foot hose by inserting the friction end of the longer hose into the larger locking end of the shorter hose. This will create a friction connection.

Diffuser Cap Assembly

Connect the lanyard to the attachment tab on the vac motor assembly to keep the diffuser attached to vac when using the blower port. The diffuser cap can be used in the exhaust port of the Wet/Dry Vac. Installing the diffuser cap will allow you to diffuse the exhaust air in any direction and reduce the intensity of the exhaust force.

Attachment Tab

Lanyard

Diffuser

Vacuum Inlet Port

Friction	Male End
End	of Hose

Tug-A-Long

Vacuum Inlet Hose

Port

13