Your Network Administrator should provide the Unit IP and Unit Gateway address.
1)This unit IP address .......... 011.022.033.044 – should be changed to an unused IP address on your network. This IP address should be added to your DHCP Server’s static IP address list.
2)Gateway Address ............... 011.022.033.001– should be changed to the IP address of your default gateway. Typically, this is the lowest address on the subnet, for example 192168100.001.
3)DHCP/RARP – This is a toggle. Entering 3 will switch from Disabled to Enabled and back.
NOTE: If you use DHCP you must figure out what IP address it obtained. Methods for doing this are covered in the troubleshooting section.
Q) Press Q when you have the IP addresses configured.
STEP 4 Enter a 2 to setup the SMTP Mailserver.
Copyright 2006 Ringdale User Manual, | Page 11 of 28 |