Recommended Piping for Basic Installation
Rinnai
Water Heater
Rinnai |
| |
Equipment List | QTY | |
Rinnai |
| |
Water Heaters | 1 | |
1 | ||
(3/4" Fittings Include: |
| |
2 | Unions, 2 Ball Valves, | |
2 | Drain Valves and |
|
1 | Pressure Relief Valve.) | |
3/4" Gas Connection
3/4" Hot Water Supply Line | |
For Building Fixtures | |
| KEY |
3/4" Ball Valve | Pressure Regulator |
| |
3/4" Union | Circulating Pump |
Check Valve | Boiler Drain Valve |
Pressure Relief Valve | S Solenoid Valve |
Gas Supply
3/4" Cold Water Supply Line
This is not an engineered drawing. It is intended only as a guide and not as a replacement for professionally engineered project drawings. This drawing is not intended to describe a complete system. It is up to the contractor/engineer to determine the necessary components and configuration of the particular system being installed. This drawing does not imply compliance with local building code requirements. It is the responsibility of the contractor/engineer to ensure installation is in accordance with all local building codes. Confer with local building officials before installation.
VA Series Indoor LS Manual | 23 |
