4 Setting up your Rio Advanced Digital Audio Center
The Rio Advanced Digital Audio Center connects to your home stereo system, your PC, and the Internet. In this chapter, you will learn how to connect the Rio Advanced Digital Audio Center, and run initial setup.
Link (green) and | Fan |
Data Activity (yellow) | Phoneline Jack |
| |
LEDs | |
|
Runs automatically as needed to regulate the internal temperature
RCA Output
Optical | USB Port 1 | USB Port 2 | Power Port |
Output | Use to connect | Use to connect to | Power Switch |
| to PC | networking devices, | |
|
| ||
|
| keyboards, and so on |
|
NOTE: At this time, USB hubs are not supported, and may cause unreliable operation.
White RCA
Jack
Red RCA
Jack
Phoneline Jack
Setting up your Rio Advanced Digital Audio Center
Connect the Rio Advanced Digital Audio Center to your home stereo system
The Rio Advanced Digital Audio Center comes with an RCA cable with red and white connectors at each end, to connect it to your home stereo system.
1.Plug the red RCA connector (right audio channel) to the Red RCA Jack and the white RCA connector (left audio channel) to the White RCA Jack on the back of your stereo receiver.
2.Plug the other end of the RCA cable’s red RCA connector to the Red RCA Jack and the white RCA connector to the White RCA Jack on back of the Rio Advanced Digital Audio Center.
Plug the Rio Advanced Digital Audio Center into the nearest phone jack for Internet and network access
The Rio Advanced Digital Audio Center has a