Roberts Radio R9940 manual Slide the Clock auto adjust switch to the ‘On’ position

4.Press and hold down the Tuning up or down buttons until the frequency in the display begins to change rapidly, release the button.

5.The radio will now start to search the FM waveband and will stop when it finds a station of sufficient strength. If the station is of sufficient strength the

symbol will light up in the liquid crystal

display.

6.Slide the Clock auto adjust switch to the ‘On’ position.

7.The time segments --:-- will flash in the liquid crystal display indicating that the radio is waiting for the RDS time signal. When the time is set the display will show the time. If the clock does not set within three to four minutes, the radio station may not be transmitting clock time (CT) information - try another radio station.

8.When your radio is switched off the symbol will remain lit indicating that the time has been set via the RDS signal.

If you need any further advice, please call our Technical Helpline on :-	7
020 8758 0338 (Mon-Fri)