To return to auto clock set mode
1.Press the On / Standby button to switch on the sound system. If necessary press and release the DAB button to put the sound system into DAB mode.
2.Press and release the Menu button to enter the setup menu.
3.Press the Tuning Up or Down buttons until "CLOCK" appears on the display. Press and release the Select button.
4.Press the Tuning Up or Down buttons until "AUTO CLK" appears on the display. Press and release the Select button.
5.The sound system will immediately set its time according to the information received with the DAB broadcast. The sound system will return to normal radio operation with the time currently displayed.
Note: If you select "AUTO CLK" the current time received will be displayed. If no DAB signal is found, "NO CLOCK" will be displayed. You should then either position the sound system or its aerial so that a signal can be received, or revert to manual clock mode (see page 28).
2
3,4
3,4
If you need any further advice, please call our Technical Helpline on :- | 30 |
020 8758 0338 |
