16.Press the Select button to enter the alarm month setting. The alarm day will flash on the display.
17.Press the Tuning Up or Down buttons to choose the alarm day.
18.Press the Select button to enter the setting. The alarm source option will flash on the display.
19.Repeatedly press the Tuning Up or Down buttons to choose the desired alarm source (DAB, FM, iPod, BUZ).
20.Press the Select button to confirm the alarm settings and return to normal radio mode.
Radio, Buzzer and iPod alarms are indicated in the display by the 
symbol and the corresponding alarm number.
When your sound system is set to wake by the radio alarm, your sound system will switch to the last used DAB or FM radio station.
When the alarm activates the alarm will start softly and gradually increase in level.
For DAB, FM or iPod alarm you may adjust the volume while the alarm is active. Without intervention the volume will gradually increase up to a mid level.
Important: If using your iPod as the source for the alarm, then be sure to dock your iPod. After docking, briefly switch on the sound system using the On / Standby button and then select iPod mode using the iPod button. Next, press the Play / Pause button two or three times to ensure that the sound system and your iPod are communicating correctly. Failure to verify this may result in the alarm not being audible if the sound system is unable to activate your iPod when needed. When ready, put the sound system back into standby mode using the On / Standby button.
16,18
17,19
17,19
20
If you need any further advice, please call our Technical Helpline on :- | 24 |
020 8758 0338 |
