Using the sound system for the first time
1.Place your sound system on a flat surface.
2.Fully extend the telescopic aerial. The aerial should be fully extended and positioned vertically for optimum reception.
3.Insert the adaptor plug into the DC socket located on the rear of your sound system. Plug the adaptor into a standard 13 amp mains socket outlet. The display will show "ROBERTS" for a few seconds and then the display will then show "SET CLOCK". After a short time the current time will appear on the display.
4.If no stations are found, "NO CLOCK" will be displayed. It may be necessary to relocate your sound system to a position giving better reception.Youshouldthencarryoutascantofindstationsasdescribedon page 11.
IMPORTANT: The mains adaptor is used as the means of connecting the sound system to the mains supply. The mains socket used for the sound system must remain accessible during normal use. In order to disconnect the sound system from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.
Characters appearing on the LCD display indicate that the sound system is connected to and powered from the mains supply.
If you need any further advice, please call our Technical Helpline on :- | 6 |
020 8758 0338 |
