Roberts Radio SOUND66 Setting the clock manually

Setting the clock manually

Normally your sound system will set its clock automatically using the DAB radio signal. If no DAB signal is available and you need to set the time manually, please follow the procedure shown below.

2

1.Press the On / Standby button to switch on the sound system. If necessary press and release the DAB or FM button to put the sound system into DAB or FM mode.

2. To set the clock time, press the Menu button to enter the setup	3-8
menu.

3.Press the Tuning Up or Down buttons until "CLOCK" appears on the display. Press and release the Select button.

3-8

4.Press the Tuning Up or Down buttons until "MANU CLK" appears on the display.

5. Press and release the Select button to enter the manual setting procedure. The hour digits will then flash on the display.

3-7

6. Press the Tuning Up or Down buttons to set the desired hour.

7.Press and release the Select button to enter the hour setting.

8.The minute digits will then flash on the display. Press the Tuning Up or Down buttons to set the desired minute.

If you need any further advice, please call our Technical Helpline on :-	28
020 8758 0338 (Mon-Fri)