Operating your radio - DAB, Welcome to DAB

Operating your radio - DAB

1.Carefully extend the telescopic aerial.

2.Press the On/Off button to switch on your radio. The display will show

'Welcome to DAB'.

3. If this is the ﬁrst time the radio is used a quick scan of the Band III DAB channels will be carried out. If the radio has been used before the last used station will be selected.

4. During the scanning process, the lower line of the display shows a bar-graph indicating progress of the scan.

5. When the scanning is completed the ﬁrst station (in numeric-alpha order 0...9...A....Z) will be selected.

6. If the station list is still empty after the scan your radio will display 'Service not available'.

7. If no signals are found it may be necessary to relocate your radio to a position giving better reception. Then, either switch your radio off and on again, or press the Auto Tune button to repeat the scan.

Page 8

Image 8

Roberts Radio Vintage manual Operating your radio - DAB, Welcome to DAB

FAQ

How do I switch on my radio?

Press the On/Off button to switch on your radio. The display will show 'Welcome to DAB' if it's the first time the radio is being used.

What should I do if no signals are found during scanning?

If no signals are found, try relocating your radio to a position with better reception. Then, either switch your radio off and on again, or press the Auto Tune button to repeat the scan.

How can I troubleshoot 'Service not available' message?

If your radio displays 'Service not available' after the scan and the station list is still empty, it may indicate a signal issue. Try relocating your radio to a better position for reception.