Manual tuning - FM

Manual tuning - FM

1. Press the On/Off button to switch on your radio.

1,6

2.Press the DAB/FM button to select the FM band. Carefully extend the telescopic aerial fully for FM reception.

3. Rotate the Tuning control to tune to a station. With each click of the control the frequency will change up or down by 50 kHz.

4.When the waveband end is reached the radio will recommence tuning from the opposite waveband end.

5.Set the Volume control to the desired settings.

6.To switch off your radio press the On/Off button.

2

If you find that an FM broadcast has a lot of background hiss, this may

3

often be reduced by setting the radio into Mono reception mode for the current FM station. Please refer to the section 'Stereo / Mono setting - FM' on page 18 for further details.

5

If you need any further advice, please call our Technical Helpline on :-

14

020 8758 0338 (Mon-Fri)

Page 14 Page 16
Page 15
Image 15
Roberts Radio Vintage manual Manual tuning - FM
Page 14 Page 16

FAQ

How do I manually tune the FM band on my Roberts Radio Vintage?

To manually tune the FM band on your Roberts Radio Vintage, press the On/Off button to switch on the radio, then press the DAB/FM button to select the FM band. Extend the telescopic aerial fully for FM reception and rotate the Tuning control to tune to a station. Set the Volume control to the desired settings and press the On/Off button to switch off the radio.

What can I do to reduce background hiss on FM broadcast?

If you find that an FM broadcast has a lot of background hiss, you can reduce it by setting the radio into Mono reception mode for the current FM station. Refer to the section Stereo/Mono setting-FM on page 18 for further details.

How can I get further advice on my Roberts Radio Vintage?

If you need any further advice, you can call the Technical Helpline at 020 8758 0338, Monday to Friday.
Top Page Image Contents