INSTALLATION

This section focuses on some of the vehicle considerations for installing your new Amplifier. Pre- planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

!CAUTION: If you feel unsure about installing this system yourself, have it installed by a qualified technician.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Trunk (preferred) and Passenger Compartment Mounting

Though preferred mounting is to the floor of the trunk, the Type RF amplifiers can be mounted in any orientation. This is due to it's unique internal cooling system which uses Backset inlets and outlets for optimized air movement even in a limited surrounding space.

MOUNTING AMPLIFIER

Mounting and wiring the amplifier requires the removal of the cover plate. Do this by removing the four (4) 3/16 head Allen screws at each top corner of the amplifier. Set the amplifier in the place it is to be mounted and mark the mounting holes. Review the Installation Considerations to safely install your unit. Wire and mount your amplifier, then, reinstall the cover plate.

5

Page 5
Image 5
Rockford Fosgate FFX3 manual Installation, Mounting Locations, Mounting Amplifier, Engine Compartment

FFX3 specifications

The Rockford Fosgate FFX3 is a powerful and versatile amplifier designed to elevate the audio experience in vehicles. Known for its exceptional build quality and performance, the FFX3 is tailored for those who demand clarity and punch from their sound systems. One of the key features of the FFX3 is its Class D amplifier topology, which allows it to deliver significant power output while maintaining high efficiency. This means less heat production and greater reliability, making it ideal for extended listening sessions.

The FFX3 boasts a maximum power output of up to 1,000 watts, enabling it to drive subwoofers and speakers with ease. It comes equipped with a variable low-pass filter that enables users to tailor their sound to perfection, ensuring that the bass is tight and well-defined. Additionally, the amplifier includes high-level inputs, making it compatible with factory-installed audio systems without the need for a signal converter. This flexibility allows users to upgrade their audio systems without extensive modifications.

One of the standout technologies in the FFX3 is its "on-board" signal processing capabilities. The amplifier features adjustable bass boost, allowing listeners to enhance lower frequencies to suit their personal preferences. Moreover, the FFX3 incorporates a thermal protection circuit, safeguarding the amplifier against overheating during intense use. The compact design of the FFX3 makes it easy to install in a variety of locations within a vehicle, ensuring that space constraints won’t be an issue.

The chassis of the FFX3 is rugged and designed to withstand the rigors of automotive environments. Its stylish aesthetics allow it to seamlessly integrate into any car interior while remaining unobtrusive. Further enhancing its versatility, the amplifier includes a remote bass level control, allowing users to adjust their bass output from the front seat for maximum convenience.

In conclusion, the Rockford Fosgate FFX3 is a powerful and efficient audio amplifier that excels in delivering high-quality sound. With its innovative features and solid construction, it is a perfect choice for anyone looking to upgrade their vehicle's audio system. Whether attentive to detail or seeking high-impact bass, the FFX3 promises to enhance any listening experience.