Rockford Fosgate PSD-1 manual Installation, Remote Turn-On/Dimmer Wiring

INSTALLATION

Remote Turn-On/Dimmer Wiring

		Do Not
		Use
Remote Jumper on
	PC Board			Orange Wire
	Remote		Connect to +12V
	Disable		dimmer or “park
			light” lead (optional)

I

N

S T A L L A T I O N

•Remote Turn-On (Blue Wire) not used when Remote Jumper has been DISABLED (installed)

•Dimmer (Orange Wire) will dim LEDs when connected to dimmer or “park light” lead (+12V when headlights are turned on)

Remote Jumper on

PC Board

Remote

Enable

Orange Wire

Connect to +12V dimmer or “park light” lead (optional)

Optional

Switch

Blue Wire

Connect to remote turn-on

lead from source unit

•Remove Cover to access Remote Jumper by removing 2 screws on each side of the PSD

•Remote Turn-On (Blue Wire) connects to source unit's accessory turn-on lead when Remote Jumper has been ENABLED (removed)

•An Optional Switch can be used to turn off the PSD independently from the audio system

•Dimmer (Orange Wire) will dim LEDs when connected to dimmer or “park light” lead (+12V when headlights are turned on)

NOTE: The Power 250m2, Power 250m and Power 500m must use the ENABLED Remote turn-On for proper operation.

– 6 –